PETG printed articles – important information

Product safety information on in PETG printed articles

Material description and properties: The products offered are products that are in 3D-Printing process for polyethylene terephthalate glycol (PETG) were produced. PETG is a resistant plastic characterized by high impact strength, flexibility and good chemical resistance. In addition PETG higher temperature resistance than PLA and is less brittle.

Heat resistance and risk of deformation: PETG compared to PLA more heat resistant, but can still be used at temperatures above approx. 70–80 °C soften and deform. Therefore, the products should not be permanently exposed to high temperatures. Use near open flames, direct sunlight for long periods of time or in dishwashers is not recommended.

Instructions for safe use:

• Store them PETG-Articles in a cool, dry place.
• Avoid direct contact with extreme heat sources.
• PETG resistant to many chemicals, but not suitable for contact with strong solvents or harsh chemicals.
• Due to the higher toughness PETG withstand more load than PLA, nevertheless, mechanical overloading should be avoided.

Production process: PETG is produced by modifying PET (polyethylene terephthalate) with glycol, resulting in improved impact strength and printability. Intact 3D-The printing process shall be: PETG in the form of filaments which are melted by heating in a nozzle and applied layer by layer to form the desired object.

Legal information: The PETG printed articles comply with the essential requirements of the Product Safety Regulation. They are more resilient than PLA-Items, but not intended for safety-critical applications or direct contact with food and beverages, unless certified.

Please note these instructions for the safe use of your PETG-Article 1.